What's Included In A Prefab Home Kit?
Home And Cabin Kit Components
$ Signs Signify Materials That Come With An Increase In Cost Per Square Foot
Exterior Framing Components (3 Options)
Conventional Framing Package
- Kiln Dried, Doug Fir, Dimensional Framing (Studs) 2×6
- Pressure Treated Sill Plate 2×6
- Doug Fir Bottom Plate 2×6
- Doug Fir Top Plate(s) 2×6
- Hold Down (holdown) Hardware
- Exterior Wall Sheathing
- CDX or OSB Project Depending
- Roof Rafters 2×12
- Roof Sheathing 5x8ths in CDX Sheathing
Panelized Framing Package – Structural Insulated Panels (SIPS) $
- Wall Panels are Manufactured of 7/16″ OSB Skins and 5 5/8″ Closed Cell EPS Foam (R-26 at 6.5”) up to (R-51 at 12.25”)
- Laser-cut using state-of-the-art CNC machinery
- All Window & Door Rough Openings Cut to Plans
- Premanufactured Window & Door Headers
- Electrical chases at 17 1/2” and 44“ off the bottom of the panel and 2’ from the edge of the panel vertically
- Roof Panels are Manufactured of 7/16″ OSB Skins and 9 3/8″ Closed Cell EPS Foam (R-40) up to (R-51)
Heavy Timber Framing Package $$
- Kiln Dried, FOHC, Douglas Fir Posts, Beams, Knee Braces, & Rafters Post base brackets for foundation connection
- Pre-drilled connection detail
- All fasteners for the timber frame
- CNC w/ Metal Joinery
- Mortise and Tenon Joinery $
- Pre-Stained Heavy Timbers w/Timber Pro UV Coatings $
Interior Framing Components
- Loft/Sub Floor System
- TJI Floor Joist
- Or 2×12 Floor Joist System
- 3/4 Inch 4×8 Foot Sheets of Tounge & Groove Sub Floor
- Timber Frame Optional $
- Walls
- Kiln Dried, Doug Fir, Dimensional Framing 2×6 & 2×4 16″ Off Center
- Doug Fir Bottom Plate 2×6
- Doug Fir Top Plate(s) 2×6
- Stairs
- 4 Foot Wide Standard Stair Package
- Standard Cedar Hand Railing
- Timber Frame Upgrade $
Exterior Finish Componets
- Woodtone Siding
- Standard is Pre-Finished Hardy Cement Board
- Siding
- Shake
- Lap
- Board & Bat
- Standard is Pre-Finished Hardy Cement Board
- Fascia
- Pre Finished
- Trim
- Pre-Finished
- No SCREWS OR NAILS
Explore Woodtone’s Home Visualizer Tool to mix and match different siding options, color tones, and more!
Weatherization Package
- DuPont Tyvek Housewrap
- FortiFlash Window & Door Tape
- Tar Paper or Ice & Water Shield Depending on Finish Roof Preference
- Ice and Water Under Metal
- Tar Paper – Shingles, Slate, Etc
Hardware Package
- Engineer-Specific Hardware Included
- Loft & Sub Floor Hangers
- Post & Beam Hardware
Interior Finish Package (Optional)
- Cabinetry
- Countertops
- Finish Flooring Material
- Hardware
- Sinks & Faucets
- Knobs & Pulls
- Finishing Touches
- Kitchen & Vanity Organizers
- Backsplash
Interior Finish components are provided by Cabinets to Go. Start exploring your options online, and plan the interior of your dreams.
Not Included:
- General Contractor and associated fees
- Permitting for construction
- Rental equipment (crane, forklift, etc.)
- Site preparation and excavation
- Concrete (foundation, etc.)
- All job site labor
- Utilities and installation
- Garage and Interior Doors
- Plumbing
- Electrical
- Lighting fixtures
- HVAC (heating and cooling)
Upgrades:
- Mortise and Tenon Timber Joinery
- SIP Insulation
- Custom Interior Design
- Interior Finish Package
- T&G Wall, Ceiling, and Soffit coverings
